Complex for storage and delivery ГСМ outside the stationary infrastructure: elastic tanks, pipelines, pumping equipment and metering units. It is deployed on an unprepared site, dismantled if necessary, and transported to a new facility.
| Ready-made solutions | ПСГ-1000 — 1,000 m3, 8 tanks ПЭР-120Н; ПСГ-2000 — 2 000 m3, 16 tanks ПЭР-120Н |
| Task ПСГ-1000 | Reserve ГСМ for a month for 100 units of equipment |
| Task ПСГ-2000 | Reserve ГСМ for a month for 200 units of equipment |
| Delivery of the kit | ПСГ-1000 is a 20—foot container, ПСГ-2000 is a 40—foot container |
| Tank capacity in the park | From 25 to 320 m3 |
| Scaling | The volume is increased by adding tanks |
| Material | Synthetic ballistic weave fabric with double-sided oil-resistant polyurethane (TPU) coating |
| Operating temperature | -60 to +80 °C |
| Service life | 10-15 years, subject to the rules of operation |
| Fittings | Intrinsically safe drain-filling outlets, breathing valves, handles |
| Foundation | Not required — installation on a prepared flat area |
| Scope of supply | Tank, complete set of technical documentation |
| Manufacturer | NPF "Polytechnic", Russia |
| Supply | Official delivery under the order, with documents |
The shell design and configuration are tailored to the environment and conditions of the facility.
The composition is selected for the task of the facility: from simple storage to a full-fledged mobile tank farm with accounting and delivery.
The field fuel depot solves a problem that the steel fleet cannot cope with: to provide fuel supply where there is no infrastructure and where capital construction is either impossible or impractical. The equipment receives a resource on the spot, without dependence on logistical leverage and downtime while waiting for delivery.
The difference in logistics is significant. The 1,000 m3 fleet of tanks ПЭР-250Н weighs about 3.2 tons and is delivered by one container ship. The same volume in steel РВС-200 weighs 62.5 tons and requires about twenty cars or ten wagons.
The complex is scaling up: the volume is increased by adding tanks, the supply scheme is changing to meet the current load. Upon completion of the work, the warehouse is dismantled and moved to the next facility.
We accept the volume, environment, and conditions of the site.
We determine the standard size, shell design and kit composition.
We are preparing an offer with a production deadline.
We ship in a compact package, with installation supervision if necessary.
Typical solutions are ПСГ-1000 and ПСГ-2000 per 1,000 and 2,000 m3. In practice, parks of a larger volume were assembled, up to 15,000 m3, due to an increase in the number of reservoirs.
Anti-filtration canopies and berms, pressure and suction hoses and collapsible pipelines, valves, quick-release joints, pumps, meters and transfer columns, fire extinguishing equipment, lightning protection, drainage water treatment system.
No. The tank is placed on a prepared flat area, cleared of sharp objects. This is the main saving: capital costs are reduced by a factor compared to a steel fleet, and storage can be deployed where construction is impossible.
From several hours to one work shift, depending on the volume. A team of 6-8 people is enough for a 200 m3 park, special equipment, welding and channel laying are not needed.
The operating range is from -60 to +80 °C. The material retains its elasticity in the cold and does not require anti-corrosion treatment, unlike a steel tank.
The shell is maintainable: the damage is repaired with an on-site repair kit. Anti-filtration canopies and protective berms are used to protect against punctures and water ingress.
Soft fuel tanks ПЭР-NRange ПЭР-H from 1 to 250 m3, up to 500 m3 on request. Intrinsically safe fittings, operating from -60 to +80 °C.
View
Soft tanks for ГСМOne fleet for fuel and oil at facilities without infrastructure. It folds up and moves to the next object.
View
Soft tanks for petroleum productsTemporary volume during pipeline repairs, emergency reserve, storage in the field before export.
View
Soft tanks for АЗСMobile and temporary АЗС: tank plus pumping and dispensing module. Without foundation and capital construction.
View
Soft Oil TanksOil storage and discharge during transformer and machinery maintenance. Without corrosion and anti-corrosion treatment.
View
Soft tanks for CAS and fertilizersField storage for the season: unwrapped before depositing, removed after. The execution of the shell under the brand CAS.
ViewAll tanks are supplied to order with a complete set of documentation.
Send us the volume, environment, and site conditions. We will select the standard size and prepare an offer.
Request a quote