Closed cushion-shaped shells made of ballistic woven fabric with polyurethane coating. Volume from 1 to 250 m3, unfolding without foundation, operating range from -60 to +80 °C.

| Design type | Closed shell of cushion shape, high-frequency welding |
| Material | Synthetic ballistic weave fabric with double-sided oil-resistant polyurethane (TPU) coating |
| Operating temperature | -60 to +80 °C |
| Service life | 10-15 years, subject to the rules of operation |
| Fittings | Intrinsically safe drain-filling outlets, breathing valves, handles |
| Foundation | Not required — installation on a prepared flat area |
| Scope of supply | Tank, complete set of technical documentation |
| Supply | Official delivery under the order, with documents |
The shell design is tailored to the environment: fuel, oil and CAS require different materials.
Field fuel depots ПСГReady-made complexes ПСГ-1000 and ПСГ-2000: tanks, pipelines, pumps and metering units. Deployed within one work shift.
View
Soft fuel tanks ПЭР-NRange ПЭР-H from 1 to 250 m3, up to 500 m3 on request. Intrinsically safe fittings, operating from -60 to +80 °C.
View
Flexible tanks for fuels and lubricantsFuel and oil storage at sites without infrastructure. The tanks can be folded for relocation to another site.
View
Soft tanks for petroleum productsTemporary volume during pipeline repairs, emergency reserve, storage on site before shipment.
View
Flexible tanks for fuel stationsMobile and temporary fuel stations: tank plus pumping and dispensing module. Without foundation and capital construction.
View
Flexible oil tanksOil storage and discharge during transformer and machinery maintenance. Without corrosion and anti-corrosion treatment.
View
Soft tanks for CAS and fertilizersField storage for the season: unwrapped before depositing, removed after. The execution of the shell under the brand CAS.
ViewChoose an application to view available sizes and delivery terms.
Soft elastic reservoirs ПЭР are closed cushion—shaped shells made of synthetic ballistic woven fabric with a double-sided oil-resistant polyurethane coating. Welding with high frequency currents ensures tightness of the seam without glue and stitching.
The main difference from the steel tank installation is the absence of foundations and capital construction. The tank unfolds on the prepared site in hours, and when folded, it takes up a minimum of space during transportation.
We supply tanks with complete documentation. We select the capacity and configuration for the stored liquid and site conditions.
Tell us the required capacity, stored liquid and site conditions.
We select the tank size, shell material and scope of supply.
We prepare a quotation with the production lead time.
We ship the tank in compact packaging and provide installation supervision if required.
No. The tank is placed on a prepared flat area, cleared of sharp objects. This is the main saving: capital costs are reduced by a factor compared to a steel tank installation, and storage can be deployed where construction is impossible.
From several hours to one work shift, depending on the volume. A team of 6-8 people is enough for a 200 m3 park, special equipment, welding and channel laying are not needed.
The operating range is from -60 to +80 °C. The material retains its elasticity in the cold and does not require anti-corrosion treatment, unlike a steel tank.
The shell is maintainable: the damage is repaired with an on-site repair kit. Anti-filtration canopies and protective berms are used to protect against punctures and water ingress.
Logistics and timing. A fleet of 1,000 m3 of elastic tanks weighs about 3.2 tons and leaves in one container ship; the same volume in РВС-200 is 62.5 tons and about twenty cars. Plus, there is no foundation, welding and lengthy approvals.
Tell us the required capacity, stored liquid and site conditions. We will select the execution and prepare the calculation.
Request a quote