Various equipment, products and structures for the construction industry. The section is gradually being updated — there are three directions at the start: embedded structures, pressure and stuffing boxes for hermetically passing pipes through foundations.

The "Building structures" section brings together various equipment, products and structures for the construction industry — the range is gradually expanding. At the start, three directions are presented: embedded structures, reference points and oil seals, pressure and stuffing boxes.

Metal elements installed in the design position before pouring concrete provide an attachment point for subsequent installation of structures and equipment. Anchor (rigid connection of fragments), fastening (connection of concrete and metal), supporting (load transfer) and connecting (fixing of mounting units) versions — open and closed.

Metal grades on a stable support (pipe or pylon), embedded in the ground or structure to transmit elevation coordinates and control the deformation of buildings and structures during construction and operation.

Metal products for hermetically passing steel, cast iron and polyethylene pipes through walls and foundations — more details below.
Embedded parts vary in series and purpose — we select a standard designation for a specific task or manufacture it according to the customer's drawing.

Unified embedded products of reinforced concrete structures for fastening technological communications and devices.

Embedded parts of other standard series are suitable for a specific mounting unit and mounting method.

If the finished series does not fit the assembly, we will produce the embedded part according to the customer's specification or drawing.

A pipe with a steel disc at the end for applying geodetic information is the basic design for laying a high—altitude network on the ground.

A pipe with a ground anchor and a steel disc records the displacement and rate of displacement of the soil, which allows you to track the deformation of rocks in advance.
Oil seals protect the pipe at the point of passage through the basement wall, the foundation of a building or the wall of a water supply and sewerage facility - they ensure the tightness of the unit and prevent moisture from entering the room from the ground. They are made of a piece of steel pipe; the body is welded to the reinforcing elements of the wall to fix the position.

The simple design is a single housing. The gap between the pipe and the body is filled with tightly twisted hemp fiber soaked in resin or bitumen, sealed with an asbestos cement lock and treated with mastic.

A complicated double—body design - both ends are equipped with welded flanges with holes. The packing is compressed with a grundbox through a flange connection, which provides more reliable and adjustable sealing, and prevents moisture from entering the ground more effectively.
| Conditional passage (DN) | 50, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600, 700, 800, 900, 1000, 1200, 1400 mm |
|---|---|
| Body length | 200, 300, 500, 800 mm — it is selected according to the thickness of the wall (equal to or slightly exceeds the thickness) |
| Permissible pressure drop | not more than 0.1 MPa (10 m of water) |
| Operating temperature | not higher than +50 °C |
| Medium | non-aggressive |
| Terms of use | wet and dry soils |
We manufacture oil seals for the required DN and body length — for the specific thickness of the wall or foundation of your facility. Send the length of the passing pipe and the thickness of the wall. We will select the standard size and prepare an offer.
Send the length of the pipe and the thickness of the wall/foundation. We will select the standard size and prepare an offer.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.