Branch pipes

Measuring hatch pipe PZL

A pipe for mounting a measuring hatch LZ and a ventilation pipe DN 50 on the roof of the tank.

PZL
Description

Purpose and design

The PZL pipe is installed on the roof of a vertical or horizontal tank and is used for mounting a measuring hatch LZ, through which level measurement and sampling are carried out, as well as for installing a ventilation pipe DN 50.

The standard size is suitable for a DN 80 or 150 hatch — for a DN 150 hatch, the ПЗЛ-150 pipe has dimensions of 325×320×180 mm and a weight of up to 10.5 kg. The material is steel, the brand is selected for the climatic version. The reinforcement plate is not included in the basic delivery, it must be ordered separately.

Parameters

Technical specifications

TypeMeasuring hatch pipe
CompatibilityOnePROM LZ gauging hatches
PurposeInstallation of the gauging hatch and ventilation pipe DN 50 on the tank
Standard sizesUnder the hatch DN 80 or 150
Dimensions (ПЗЛ-150)325×320×180 mm, weight up to 10.5 kg
MaterialSteel (grade according to climatic design)
Installation locationTank roof (vertical or horizontal)
Scope of supplyReinforcing pad — separately
VersionU/UHL, placement category 1 for ГОСТ 15150-69
Questions

Frequently asked questions

Under which hatch is the PZL selected?
The pipe is available for two standard sizes of the measuring hatch LZ — DN 80 and DN 150. The most popular is ПЗЛ-150.
Why is there a DN 50 ventilation pipe in the pipe?
In addition to the LZ hatch, a ventilation pipe with a nominal bore DN 50 is connected to the roof through the PZL nozzle. This provides additional air exchange in the gas space of the tank.
Is the reinforcement plate included in the PZL kit?
No, the reinforcement plate for the fitting of the pipe into the tank roof is not included in the basic delivery and must be ordered separately.
Is it possible to install a PZL on a horizontal tank?
Yes, the nozzle is used on both vertical and horizontal tanks — the design and size range are the same.

Need: pipe measuring hatch PZL?

Tell us the gauging hatch size (DN 80 or DN 150). We will select the matching nozzle and send you a quotation.

Request a quote