СКУ in a steel protective casing with thermal insulation (mineral wool or ППУ-shell). For above-ground and channel laying of heating networks.
| Type | Single-section, steel protective casing, welded/flange |
| Movements absorbed | axial (linear compensation) |
| Nominal diameter, DN | 50-1200 mm (up to 3000 mm on request) |
| Working pressure, PN | up to 25 kgf/cm²; higher to order |
| Medium temperature | up to +200 °C |
| Working medium | mains water, steam, and other media of heating networks |
| Bellows material | corrosion-resistant steel 12Kh18N10T |
| Thermal insulation | ППУ by ГОСТ 30732 / minvata (by performance) |
| Connection | welding nozzles or flanges |
| Manufacturing | to project parameters (DN, PN, travel) |
The exact values of the compensating capacity and the construction length depend on the standard size and are determined by selection according to the questionnaire. Isolation ППУ — according to ГОСТ 30732.
Other diameters and versions are manufactured to order.
СКУ.M is a bellows compensation device in a steel protective casing. The casing protects the bellows from mechanical damage and directs axial movement; thermal insulation is performed with mineral wool or shell ППУ.
It is used on aboveground and ducted heating networks. The connection is either welded or flanged. Two—section design (2СКУ.М) - for increased axial stroke.
OnePROM produces СКУ.M for the parameters of the object: diameter, pressure, temperature and axial stroke. The exact values are based on the questionnaire.
We accept a questionnaire or a laying scheme, select the design and parameters.
We calculate the compensating capacity and prepare a quotation.
We produce a device for the parameters of the facility with quality control.
We ship to site and, where required, provide installation, installation supervision and commissioning.
СКУ in a steel protective casing with thermal insulation (mineral wool or ППУ-shell). For above-ground and channel laying of heating networks. It is used for: above-ground heating networks, duct laying, main heating networks, central heating and boiler houses, steam pipelines, housing and communal services and heat supply.
СКУ.The M is manufactured according to the parameters of the object: nominal diameter 50-1200 mm (up to 3000 mm on request); working pressure up to 25 kgf/cm2; higher on request; temperature up to +200 °C; working medium — mains water, steam and other media of heating networks.
Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.
Send us a questionnaire or a laying scheme. We will prepare a calculation and a quotation.
Request a quote