Axial expansion joint with double (telescopic) protective casing, for welding. Enhanced performance for critical areas.

| Type | Axial, reinforced telescopic casing, for welding |
| Movements absorbed | axial (compression/stretching) |
| Nominal diameter, DN | 50-1000 mm (up to 3000 mm on request) |
| Working pressure, PN | up to 25 kgf/cm²; higher to order |
| Medium temperature | up to +450 °C |
| Working medium | water, steam, gas, petroleum products and other non-aggressive media |
| Bellows material | corrosion-resistant steel 12Kh18N10T |
| Connection | weld ends |
| Manufacturing | to project parameters (DN, PN, travel) |
Exact compensating capacity and face-to-face length depend on the size and are determined during selection from the completed questionnaire.
Other diameters and configurations are available to order.
Bellows axial expansion joint with reinforced casing (OPKR) is an axial expansion joint with a double telescopic casing in which a pipe of a larger diameter enters a pipe of a smaller diameter. The bellows is completely hidden inside the casing and protected from external influences.
The telescopic design directs axial movement and increases reliability at high speeds and during underground laying. The connection is for welding.
OnePROM manufactures an OPKR for the project parameters. Please send us a questionnaire for selection. We will calculate the compensation capacity and prepare the control panel.
Send your specification or completed data sheet so we can select a suitable expansion joint.
We calculate the required movement capacity and prepare your quotation.
We manufacture the expansion joint to project parameters under quality control.
We ship to site and, where required, provide installation, installation supervision and commissioning.
Axial expansion joint with double (telescopic) protective casing, for welding. Enhanced performance for critical areas. Used in: heating networks and heat supply, steam pipelines, process pipelines, hot water and HVAC systems, boiler houses and central heating plants, oil and gas facilities.
The OPKR is manufactured to meet the project parameters: nominal diameter 50-1000 mm (up to 3000 mm on request); working pressure up to 25 kgf/cm2; higher on request; temperature up to +450 °C; working medium — water, steam, gas, petroleum products and other non-aggressive media.
Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.
Send a data sheet or specification — we will prepare a calculation and a quotation.
Request a quote