Axial expansion joint with external protective casing and weld ends. For heating networks and heat supply.

| Type | Axial, with protective casing, for welding |
| Movements absorbed | axial (compression/stretching) |
| Nominal diameter, DN | 50-800 mm (up to 3000 mm on request) |
| Working pressure, PN | up to 25 kgf/cm²; higher to order |
| Medium temperature | up to +450 °C |
| Working medium | water, steam, gas, petroleum products and other non-aggressive media |
| Bellows material | corrosion-resistant steel 12Kh18N10T |
| Connection | weld ends |
| Manufacturing | to project parameters (DN, PN, travel) |
Exact compensating capacity and face-to-face length depend on the size and are determined during selection from the completed questionnaire.
Other diameters and configurations are available to order.
Bellows axial welded expansion joint with casing (OPK) is an axial expansion joint in which the bellows is closed by an external cylindrical casing. The casing protects the corrugated shell from mechanical damage and thermal insulation during installation.
It is used on heating networks and process pipelines to compensate for axial movements between fixed supports. Connection — by weld ends.
OnePROM manufactures an OPK for the project parameters: diameter, pressure, temperature and axial stroke. Selection, calculation and delivery — according to a questionnaire or specification.
Send your specification or completed data sheet so we can select a suitable expansion joint.
We calculate the required movement capacity and prepare your quotation.
We manufacture the expansion joint to project parameters under quality control.
We ship to site and, where required, provide installation, installation supervision and commissioning.
Axial expansion joint with external protective casing and weld ends. For heating networks and heat supply. Used in: heating networks and heat supply, steam pipelines, process pipelines, hot water and HVAC systems, boiler houses and central heating plants, oil and gas facilities.
The OPK is manufactured to meet the parameters of the facility: nominal diameter 50-800 mm (up to 3000 mm on request); working pressure up to 25 kgf/cm2; higher on request; temperature up to +450 °C; working medium — water, steam, gas, petroleum products and other non-aggressive media.
Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.
Send a data sheet or specification — we will prepare a calculation and a quotation.
Request a quote