For areas with increased displacement and seismic loads. Gimbal frame, compensation on all axes.

| Type | Seismic gimbal (two bellows), flanged |
| Movements absorbed | on all axes (X, Y, Z) |
| Nominal diameter, DN | 50-1000 mm (up to 3000 mm on request) |
| Working pressure, PN | up to 25 kgf/cm²; higher to order |
| Medium temperature | up to +450 °C |
| Working medium | water, steam, gas, petroleum products and other non-aggressive media |
| Bellows material | corrosion-resistant steel 12Kh18N10T |
| Connection | flanges according to ГОСТ |
| Manufacturing | to project parameters (DN, PN, travel) |
Exact compensating capacity and face-to-face length depend on the size and are determined during selection from the completed questionnaire.
Other diameters and configurations are available to order.
The bellows seismic gimbal expansion joint (KSS.КМ) is an expansion joint consisting of two bellows in a gimbal frame, which senses movement along all axes and is designed for areas with increased and seismic loads.
The gimbal frame with axes allows angular movements in any plane and, together with the shift, provides compensation for spatial movements during seismic impacts.
OnePROM manufactures KSS.КМ for the project parameters and seismic requirements. The exact parameters are based on the questionnaire and design data.
Send your specification or completed data sheet so we can select a suitable expansion joint.
We calculate the required movement capacity and prepare your quotation.
We manufacture the expansion joint to project parameters under quality control.
We ship to site and, where required, provide installation, installation supervision and commissioning.
For areas with increased displacement and seismic loads. Gimbal frame, compensation on all axes. Applies: earthquake-prone areas, heating networks and heat supply, technological pipelines, oil and gas facilities, energy facilities, responsible highways.
KSS.КМ is made according to the project parameters: nominal diameter 50-1000 mm (up to 3000 mm on request); working pressure up to 25 kgf/cm2; higher on request; temperature up to +450 °C; working medium — water, steam, gas, petroleum products and other non-aggressive media.
Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.
Send a data sheet or specification — we will prepare a calculation and a quotation.
Request a quote