Bellows expansion joint

KSP

Bellows rotary expansion joint (angular articulated)

Compensation of angular movements due to rotation around the hinge. Side hinged plates.

Nominal diameter DN
50-800 mm
Nominal pressure PN
up to 25 kgf/cm²
Temperature
up to +450 °C
Bellows rotary expansion joint (angular hinged) KSP

Applications

District heating networks
Steam lines
Process pipelines
Hot and cold water systems
Boiler houses and heating substations
Oil and gas facilities

Specifications

TypeAngular hinged, flanged/welded
Movements absorbedangular (in the same plane)
Nominal diameter, DN50-800 mm (up to 3000 mm on request)
Working pressure, PNup to 25 kgf/cm²; higher to order
Medium temperatureup to +450 °C
Working mediumwater, steam, gas, petroleum products and other non-aggressive media
Bellows materialcorrosion-resistant steel 12Kh18N10T
Connectionflanges or weld ends
Manufacturingto project parameters (DN, PN, travel)

Exact compensating capacity and face-to-face length depend on the size and are determined during selection from the completed questionnaire.

Size range

DN 50DN 65DN 80DN 100DN 125DN 150DN 200DN 250DN 300DN 350DN 400DN 500DN 600DN 700DN 800

Other diameters and configurations are available to order.

Description

Bellows rotary expansion joint (KSP) is an angular articulated expansion joint that senses the angular movement of the pipeline by rotating around the hinge. The side hinge plates and axes define the plane of rotation.

Articulated expansion joints are used in pairs or three at spatial sites to compensate for temperature elongations by bending, without pressure thrust on the supports.

OnePROM manufactures a KSP for the project parameters: diameter, pressure, temperature and angle of rotation. Selection is based on a questionnaire.

How we work

Selection

Send your specification or completed data sheet so we can select a suitable expansion joint.

Calculation and quotation

We calculate the required movement capacity and prepare your quotation.

Manufacturing

We manufacture the expansion joint to project parameters under quality control.

Delivery and installation

We ship to site and, where required, provide installation, installation supervision and commissioning.

Frequently asked questions

What is KSP and where is it applied?

Compensation of angular movements due to rotation around the hinge. Side hinge plates. Used in: heating networks and heat supply, steam pipelines, process pipelines, hot water and HVAC systems, boiler houses and central heating plants, oil and gas facilities.

What diameters, pressure, and temperature does the KSP allow?

The KSP is manufactured according to the project parameters: nominal diameter 50-800 mm (up to 3000 mm on request); working pressure up to 25 kgf/cm2; higher on request; temperature up to +450 °C; working medium — water, steam, gas, petroleum products and other non-aggressive media.

How to order a KSP?

Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.

We will select the KSP for your project

Send a data sheet or specification — we will prepare a calculation and a quotation.

Request a quote