Axial expansion joint for high-pressure pipelines. Multi-layered bellows with reinforcing rings.

| Type | Axial, High pressure, Flanged/Welded |
| Movements absorbed | axial (compression/stretching) |
| Nominal diameter, DN | 50-800 mm (up to 3000 mm on request) |
| Working pressure, PN | up to 100 kgf/cm2; higher on request |
| Medium temperature | up to +450 °C |
| Working medium | water, steam, gas, petroleum products and other non-aggressive media |
| Bellows material | corrosion-resistant steel 12Kh18N10T |
| Connection | flanges or weld ends |
| Manufacturing | to project parameters (DN, PN, travel) |
Exact compensating capacity and face-to-face length depend on the size and are determined during selection from the completed questionnaire.
Other diameters and configurations are available to order.
Bellows axial high-pressure expansion joint (KSO.VD) is an axial expansion joint designed for increased operating pressure. A multilayer bellows is used, reinforced with rings installed in the depressions of the corrugations.
Reinforcing rings increase the strength of the bellows at high pressure, while maintaining its mobility along the axis. The design is flanged or welded.
OnePROM produces KSO.VD for the project parameters: diameter, operating pressure, temperature and axial stroke. The exact parameters are selected based on a questionnaire.
Send your specification or completed data sheet so we can select a suitable expansion joint.
We calculate the required movement capacity and prepare your quotation.
We manufacture the expansion joint to project parameters under quality control.
We ship to site and, where required, provide installation, installation supervision and commissioning.
Axial expansion joint for high-pressure pipelines. Multi-layered bellows with reinforcing rings. Used in: heating networks and heat supply, steam pipelines, process pipelines, hot water and HVAC systems, boiler houses and central heating plants, oil and gas facilities.
KSO.VD is manufactured according to the project parameters: nominal diameter 50-800 mm (up to 3000 mm on request); working pressure up to 100 kgf/cm2; higher on request; temperature up to +450 °C; working medium — water, steam, gas, petroleum products and other non-aggressive media.
Complete the data sheet on the site or request a quote — we will select the size for your parameters (DN, PN, working travel, medium). Made to order, delivered across Russia and the CIS.
Send a data sheet or specification — we will prepare a calculation and a quotation.
Request a quote