Flanged expansion joint with a PTFE lining for acids, alkalis and aggressive chemical media. The inert PTFE lining and steel cord reinforcement provide chemical resistance and absorb movement.
PTFE · steel 20
| Type | PTFE-lined rubber expansion joint, flanged |
|---|---|
| Nominal bore, DN | 50 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | depends on the medium (confirmed during selection) |
| Working medium | acids, alkalis, chemically aggressive and high-purity media |
| Lining (contact layer) | PTFE, inert to the medium |
| Reinforcement | rubber with textile or steel cord |
| Flanges | swivel type, steel 20; dimensions to GOST 12820 |
| Flange, D / K (for PN 16) | 160 / 125 mm |
| Flange holes | 4 × ⌀18 mm |
| Flange thickness b | 19 mm (Pn 16) · 15 mm (Pn 10) |
| Pipe outside diameter | 57 mm |
| Face-to-face length, L | 105 mm |
| DN | D, mm | K, mm | L, mm | Pipe, mm | b, mm | Holes d×n |
|---|---|---|---|---|---|---|
| 32 | 135 | 100 | 95 | 38 | 16 | 18×4 |
| 40 | 145 | 110 | 100 | 45 | 17 | 18×4 |
| 50 | 160 | 125 | 105 | 57 | 19 | 18×4 |
| 65 | 180 | 145 | 115 | 76 | 21 | 18×4 |
| 80 | 195 | 160 | 135 | 89 | 21 | 18×4 |
| 100 | 215 | 180 | 150 | 108 | 23 | 18×8 |
| 125 | 245 | 210 | 165 | 133 | 25 | 18×8 |
| 150 | 280 | 240 | 180 | 159 | 25 | 22×8 |
| 200 | 335 | 295 | 210 | 219 | 27 | 22×12 |
| 250 | 405 | 355 | 245 | 275 | 28 | 26×12 |
| 300 | 460 | 410 | 255 | 325 | 28 | 26×12 |
| 350 | 520 | 470 | 255 | 377 | 30 | 26×16 |
| 400 | 580 | 525 | 255 | 426 | 34 | 30×16 |
| 500 | 710 | 650 | 260 | 520 | 44 | 33×20 |
| 600 | 840 | 770 | 260 | 630 | 45 | 36×20 |
| 700 | 910 | 840 | 260 | 720 | 47 | 36×24 |
| 800 | 1020 | 950 | 260 | 820 | 49 | 39×24 |
| 900 | 1120 | 1050 | 260 | 920 | 54 | 39×28 |
| 1000 | 1255 | 1170 | 260 | 1020 | 58 | 42×28 |
D is the outer diameter of the flange, K is the diameter of the circumference of the holes, L is the face length, b is the thickness of the flange, d×n is the diameter and number of holes. The current standard size (DN 50) is highlighted. For Pn 10, the thickness of flange b is less (see passport). Flange sizes according to ГОСТ 12820.
The rubber expansion joint PTFE DN 50 is a flanged insert with a fluoroplastic lining for pipelines with aggressive media. The inert layer PTFE protects against acids, alkalis and chemicals, the rubber force layer with a cord dampens vibration and compensates for axial, shear and angular movements.
For this standard size (PN 16): flange with an outer diameter of 160 mm, diameter of the circumference of the holes 125 mm, 4 holes ⌀18 mm, flange thickness 19 mm, face length 105 mm, outer diameter of the pipe to be connected 57 mm. Flanges made of steel 20 according to ГОСТ 12820; for Pn 10, the flange thickness is less.
OnePROM selects the size and version to suit the medium, concentration and project parameters, and supplies the joint with a data sheet. To start the selection, send the parameters or complete the questionnaire.
We receive the parameters or questionnaire and check PTFE resistance to your medium.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the medium and the parameters — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.