PTFE-lined rubber expansion joint

PTFE DN 250

Flanged, PTFE lining, PN 10/16

Flanged expansion joint with a PTFE lining for acids, alkalis and aggressive chemical media. The inert PTFE lining and steel cord reinforcement provide chemical resistance and absorb movement.

Diameter, DN
250 mm
Pressure, PN
10 / 16 bar
Face-to-face, L
245 mm
PTFE
DN 250
Rubber expansion joint PTFE Ду250 flanged PTFE · steel 20
Applications

Where it is used

Chemical industry
Oil, gas and refining
Power generation, steam and hot water
Metallurgy
Water treatment and chemicals
Utilities and aggressive effluent
Specifications

Technical specifications

TypePTFE-lined rubber expansion joint, flanged
Nominal bore, DN250 mm
Working pressure, PN10 / 16 bar
Medium temperaturedepends on the medium (confirmed during selection)
Working mediumacids, alkalis, chemically aggressive and high-purity media
Lining (contact layer)PTFE, inert to the medium
Reinforcementrubber with textile or steel cord
Flangesswivel type, steel 20; dimensions to GOST 12820
Flange, D / K (for PN 16)405 / 355 mm
Flange holes12 × ⌀26 mm
Flange thickness b28 mm (Pn 16) · 23 mm (Pn 10)
Pipe outside diameter275 mm
Face-to-face length, L245 mm
Size range

Connection dimensions (PN 16)

DND, mmK, mmL, mmPipe, mmb, mmHoles d×n
3213510095381618×4
40145110100451718×4
50160125105571918×4
65180145115762118×4
80195160135892118×4
1002151801501082318×8
1252452101651332518×8
1502802401801592522×8
2003352952102192722×12
2504053552452752826×12
3004604102553252826×12
3505204702553773026×16
4005805252554263430×16
5007106502605204433×20
6008407702606304536×20
7009108402607204736×24
80010209502608204939×24
900112010502609205439×28
10001255117026010205842×28

D is the outer diameter of the flange, K is the diameter of the circumference of the holes, L is the face length, b is the thickness of the flange, d×n is the diameter and number of holes. The current standard size (DN 250) is highlighted. For Pn 10, the thickness of flange b is less (see passport). Flange sizes according to ГОСТ 12820.

Description

About the expansion joint PTFE DN 250

The rubber expansion joint PTFE DN 250 is a flange insert with a fluoroplastic lining for pipelines with aggressive media. The inert layer PTFE protects against acids, alkalis and chemicals, the rubber force layer with a cord dampens vibration and compensates for axial, shear and angular movements.

For this standard size (PN 16): flange with an outer diameter of 405 mm, diameter of the circumference of the holes 355 mm, 12 holes ⌀26 mm, flange thickness 28 mm, face length 245 mm, outer diameter of the pipe to be connected 275 mm. Flanges made of steel 20 according to ГОСТ 12820; for Pn 10, the flange thickness is less.

OnePROM selects the size and version to suit the medium, concentration and project parameters, and supplies the joint with a data sheet. To start the selection, send the parameters or complete the questionnaire.

How we work

From enquiry to delivery

01

Selection

We receive the parameters or questionnaire and check PTFE resistance to your medium.

02

Calculation and quotation

We calculate movements and thrust forces and prepare an offer.

03

Supply

Shipped from stock or made to order with the required flange configuration.

04

Installation

Installation, installation supervision and commissioning on site where required.

Questions

Frequently asked questions

Which media is the PTFE joint suitable for?
The PTFE lining is inert to most aggressive media: acids, alkalis, solvents and chemicals. Compatibility with a specific medium and concentration is checked against a chemical resistance table during selection.
What is the pressure and dimensions of the DN 250?
The operating pressure is 10/16 bar. For PN 16: flange D 405 mm, K 355 mm, 12×⌀26 mm, length L 245 mm. Dimensions according to ГОСТ 12820.
How does the PN 10 version differ from PN 16?
The connection dimensions are similar, but the PN 16 version has a thicker flange and larger fixings. Full PN 10 and PN 16 tables are given in the data sheet.
How do I select and order?
Send the medium, concentration, pressure and diameter, or complete the questionnaire — we will select the version and prepare a quotation. Delivery across Russia and the CIS.

Let's select the expansion joint PTFE DN 250 for the object

Send the medium and the parameters — we will prepare a calculation and a quotation.

Request a quote