Flanged rubber expansion joint with an NBR lining for petroleum products and oils. It damps vibration and noise and absorbs axial, lateral and angular pipeline movement.
NBR · steel 20
| Type | Rubber expansion joint (flexible connector), flanged, single sphere |
|---|---|
| Nominal bore, DN | 40 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | −30 to +90 °C (depends on the medium) |
| Working medium | petroleum products, petrol, diesel, mineral oils, non-aggressive media |
| Not to be used for | concentrated acids and alkalis (PTFE joints are used for these) |
| Lining (bellows) | NBR (nitrile butadiene) reinforced with textile cord |
| Flanges | swivel type, steel 20 (optionally 09G2S or 12Kh18N10T) |
| Connection | flanged |
| Flange, D / D1 / B | 145 / 110 / 16 mm |
| Face-to-face length, L | 95 mm |
| Movements | axial compression of 8 mm · stretching of 5 mm · lateral 8 mm · bending of 15° |
| Service life | at least 20 years under normal operating conditions |
| DN | D, mm | D1, mm | B, mm | L, mm |
|---|---|---|---|---|
| 40 | 145 | 110 | 16 | 95 |
| 50 | 160 | 125 | 16 | 105 |
| 65 | 180 | 145 | 18 | 115 |
| 80 | 195 | 160 | 18 | 135 |
| 100 | 215 | 180 | 20 | 150 |
| 125 | 245 | 210 | 21 | 165 |
| 150 | 280 | 240 | 21 | 180 |
| 200 | 335 | 295 | 21 | 210 |
| 250 | 405 | 355 | 23 | 230 |
| 300 | 460 | 410 | 25 | 245 |
| 400 | 580 | 525 | 34 | 265 |
D is the outer diameter of the flange, D1 is the diameter of the circumference of the holes, B is the thickness of the flange, L is the face length. The current standard size (DN 40) is highlighted. The connecting dimensions of the flanges are according to ГОСТ/DIN PN 10/16.
| DN | Axial compression, mm | Axial extension, mm | Lateral offset, mm | Angular deflection |
|---|---|---|---|---|
| 40 | 8 | 5 | 8 | 15° |
| 50 | 8 | 6 | 8 | 15° |
| 65 | 12 | 6 | 10 | 15° |
| 80 | 12 | 10 | 10 | 15° |
| 100 | 18 | 10 | 12 | 15° |
| 125 | 18 | 10 | 12 | 15° |
| 150 | 18 | 14 | 12 | 15° |
| 200 | 25 | 14 | 22 | 15° |
| 250 | 25 | 14 | 22 | 15° |
| 300 | 25 | 16 | 22 | 15° |
| 400 | 25 | 16 | 22 | 15° |
Values are given for the standard version; for specific conditions they are confirmed during selection.
The rubber expansion joint NBR DN 40 is a flanged vibration insert for pipelines with petroleum products and oils. The elastic sphere made of NBR reinforced with textile cord dampens vibration and noise from pumps and equipment, compensates for axial, shear and angular movements, reduces the load during water impact and temperature deformations.
For this standard size: a flange with an outer diameter of 145 mm, a hole circumference of 110 mm, a flange thickness of 16 mm, and a face length of 95 mm. Permissible movements are axial compression up to 8 mm, stretching up to 5 mm, lateral displacement up to 8 mm, bending angle up to 15°. Flanges made of 20 steel; on request — 09Г2С or stainless 12Х18Н10Т.
OnePROM selects the size and flange material to suit the project parameters and supplies the joint with a data sheet. To start the selection, send the parameters or complete the questionnaire.
We receive the parameters or questionnaire and select the size and flange material.
We calculate movements and thrust forces and prepare a quotation.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.