VITEX is a fluoro—rubber (FKM, Viton) expansion joint for the most aggressive media: concentrated acids, biodiesel and chemically active liquids. Fluoro—rubber is the most resistant elastomer to aggressive media.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-200 mm |
| Bellows PN | 16 bar |
| Medium temperature | −15 … +110 °C (12.2015) |
| Working medium | concentrated acids, biodiesel, aggressive chemical media |
| Inner layer (lining) | fluoro-rubber (FKM, Viton) |
| Outer layer | ECO |
| Flanges | swivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Data from official ELAFLEX sheet 447–448, revision 12.2015. FKM liner, ECO cover; the range −15 … +110 °C depends on the medium, temporarily up to +130 °C. Bellows PN 16; allowable assembly pressure also depends on flanges and temperature. Current availability, chemical compatibility and configuration-specific limits must be confirmed during selection. ELAFLEX PDF
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 16 | 115 | 85 | 4×14 | 130 | VITEX 25.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 130 | VITEX 32.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 130 | VITEX 40.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 130 | VITEX 50.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 130 | VITEX 65.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 130 | VITEX 80.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 130 | VITEX 100.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 130 | VITEX 125.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 130 | VITEX 150.16 Request |
| 200 | 16 | 340 | 295 | 8×22 | 130 | VITEX 200.10 Request |
Variants from the Elaflex catalogue, revision 12.2015. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. ELAFLEX 447–448 · PDF
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
VITEX is a fluoro—rubber (FKM, Viton) expansion joint for the most aggressive media: concentrated acids, biodiesel and chemically active liquids. Fluoro—rubber is the most resistant elastomer to aggressive media.
Diameters DN 25-200 mm, flanges DIN PN 10/16. It is used in the chemical, oil and gas and food industries. Compatibility with the environment is confirmed during selection.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.