ROTEX is a wear—resistant rubber expansion joint for heating and cooling systems, including hot water and hot air. Increased resistance to abrasion and temperature stress.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-1000 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | −40 … +130 °C |
| Working medium | hot and cold water, heating and cooling systems, hot air |
| Not to be used for | petroleum products and oils |
| Inner layer (lining) | EPDM |
| Outer layer | EPDM, wear- and heat-resistant |
| Flanges | swivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Temperature range checked against the ELAFLEX catalogue. Allowable pressure, temperature and movement are interdependent and depend on the medium and configuration; maximum values must not be combined without verification. Select against the manufacturer catalogue. ELAFLEX · 411–412
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 16 | 115 | 85 | 4×14 | 130 | ROTEX 25.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 130 | ROTEX 32.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 160 | ROTEX 32x160.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 130 | ROTEX 40.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 160 | ROTEX 40x160.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 130 | ROTEX 50.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 160 | ROTEX 50x160.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 130 | ROTEX 65.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 160 | ROTEX 65x160.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 130 | ROTEX 80.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 150 | ROTEX 80x150.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 160 | ROTEX 80x160.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 130 | ROTEX 100.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 150 | ROTEX 100x150.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 160 | ROTEX 100x160.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 130 | ROTEX 125.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 150 | ROTEX 125x150.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 160 | ROTEX 125x160.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 130 | ROTEX 150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 150 | ROTEX 150x150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 160 | ROTEX 150x160.16 Request |
| 200 | 16 | 340 | 295 | 8×22 | 130 | ROTEX 200.10 Request |
| 200 | 16 | 340 | 295 | 8×22 | 150 | ROTEX 200x150.10 Request |
| 200 | 16 | 340 | 295 | 8×22 | 160 | ROTEX 200x160.10 Request |
| 200 | 16 | 340 | 295 | 8×22 | 175 | ROTEX 200x175.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 130 | ROTEX 250.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 175 | ROTEX 250x175.10 Request |
| 250 | 10 | 395 | 350 | 12×22 | 200 | ROTEX 250x200.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 130 | ROTEX 300.10 Request |
| 300 | 10 | 445 | 400 | 12×22 | 200 | ROTEX 300x200.10 Request |
| 350 | 16 | 505 | 460 | 16×22 | 200 | ROTEX 350.10 Request |
| 400 | 16 | 565 | 515 | 16×26 | 200 | ROTEX 400.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 200 | ROTEX 450.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 250 | ROTEX 450x250.10 Request |
| 500 | 10 | 670 | 620 | 20×26 | 200 | ROTEX 500.10 Request |
| 600 | 10 | 780 | 725 | 20×30 | 200 | ROTEX 600.10 Request |
| 700 | 10 | 895 | 840 | 24×30 | 260 | ROTEX 700.10 Request |
| 800 | 10 | 1015 | 950 | 24×33 | 250 | ROTEX 800.10 Request |
| 900 | 10 | 1115 | 1050 | 28×33 | 300 | ROTEX 900.10 Request |
| 1000 | 10 | 1230 | 1160 | 28×36 | 300 | ROTEX 1000.10 Request |
Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. Bellows PN is not the permissible pressure of the complete assembly: flange rating, medium and temperature must be considered. ERV-G and ROTEX DN 250 and DN 300 with BL 200 mm have bellows PN 10. ELAFLEX 411–412 · PDF
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
ROTEX is a wear—resistant rubber expansion joint for heating and cooling systems, including hot water and hot air. Increased resistance to abrasion and temperature stress.
Diameters DN 25-1000 mm, lining EPDM, flanges DIN PN 10/16. For hot media, the operating parameters are specified during selection. OnePROM selects the standard size and prepares the calculation.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.