Rubber expansion joint Elaflex · PTFE

ERV-TA

With fluoroplastic (PTFE) coating

ERV-TA is a rubber expansion joint Elaflex with a fluoroplastic (PTFE) coating of the inner chamber. PTFE-The liner provides maximum chemical resistance and inertia to the environment while maintaining the flexibility of the rubber expansion joint.

Diameter, DN
25-600 mm
Pressure, PN
6 / 10 bar
Purpose
PTFE-liner
ERV-TA Rubber expansion joint Elaflex ERV-TA — With fluoroplastic (PTFE) coating Elaflex · Germany
Applications

Where it is used

Particularly aggressive chemicals
High-purity media
Pharma and food industry
Special applications
Specifications

Technical specifications

TypeRubber (flexible) expansion joint, flanged
Nominal bore, DN25-600 mm
Working pressure, PN6 / 10 bar
Medium temperatureaccording to the base ERV series and PTFE lining configuration
Working mediumparticularly aggressive and highly pure chemical media
Inner layer (lining)fluoroplast (PTFE), rubber force layer
Outer layeraccording to the base ERV series
Flangesswivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium)
MarkingERV / type, DN, PN, date of manufacture

Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.

ELAFLEX, pages 467–470, revision 08.2026. TA is an ERV configuration with PTFE lining: TA 6 bar — DN 25–300; TA 10 bar and TA OHM 10 bar — DN 25–600. White TA lining is electrically insulating and unsuitable for flammable liquids in hazardous areas. Conductive TA OHM requires separate selection. Lining reduces allowable movement by approximately 50% and increases length by at least twice the lining thickness. Supplied only as a factory-assembled unit with flanges. ELAFLEX PDF

Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).

Size range

Available diameters

Select PTFE lining

Lining variantDNLining pressure limit, barReference D ≈, mmThickness S, mmVariant / request
TA256271Request
TA326271Request
TA406341Request
TA506431Request
TA656581Request
TA806731Request
TA1006931Request
TA12561181Request
TA15061431Request
TA20061981Request
TA25062481Request
TA30062981Request
TA2510253.5Request
TA3210253.5Request
TA4010323Request
TA5010393Request
TA6510543Request
TA8010693Request
TA10010884Request
TA125101124.5Request
TA150101375Request
TA200101925Request
TA250102425.5Request
TA300102915.5Request
TA350103216Request
TA400103826Request
TA450104326Request
TA500104826Request
TA600105736Request
TA OHM2510253.5Request
TA OHM3210253.5Request
TA OHM4010323Request
TA OHM5010393Request
TA OHM6510543Request
TA OHM8010693Request
TA OHM10010884Request
TA OHM125101124.5Request
TA OHM150101375Request
TA OHM200101925Request
TA OHM250102425.5Request
TA OHM300102915.5Request
TA OHM350103216Request
TA OHM400103826Request
TA OHM450104326Request
TA OHM500104826Request
TA OHM600105736Request

D is the reference lining dimension in the manufacturer drawing, not the flange diameter. Base ERV type, permissible assembly pressure and temperature, flanges and overall length require separate selection. White TA is unsuitable for flammable liquids in Ex-zones. Black TA OHM is selected for such applications on request. Factory assembled units only; base ERV movements are reduced by approximately 50% and length increases by at least 2S. ELAFLEX 467–470 · 08.2026 · PDF

The operating pressure, connection dimensions and flange configuration for the ERV-TA are tailored to the task. The exact parameters and weight are available in the passport / on request.

Description

About the ERV-TA expansion joint

ERV-TA is a rubber expansion joint Elaflex with a fluoroplastic (PTFE) coating of the inner chamber. PTFE-The liner provides maximum chemical resistance and inertia to the environment while maintaining the flexibility of the rubber expansion joint.

Diameters are available on request (standard range DN 25-600 mm), flanges DIN PN 10/16. It is used for particularly aggressive and high-purity media. The configuration is tailored to the task.

How we work

From enquiry to delivery

01

Selection

We receive the parameters or questionnaire and select the series and size.

02

Calculation and quotation

We calculate movements and thrust forces and prepare an offer.

03

Supply

Shipped from stock or made to order with the required flange configuration.

04

Installation

Installation, installation supervision and commissioning on site where required.

Questions

Frequently asked questions

For which environments is ERV-TA suitable?
It is suitable for the following media: particularly aggressive and highly pure chemical media.
What diameters and pressures are available?
TA: DN 25–300 / 6 bar; DN 25–600 / 10 bar. according to the base ERV series and PTFE lining configuration.
How to choose and order an ERV-TA?
Send the project parameters (DN, PN, medium, temperature, movements) or complete the questionnaire — we will select the size, calculate thrust forces and prepare a quotation. Delivery across Russia and the CIS.

Let's select the ERV-TA for your facility

Send the parameters or a questionnaire — we will prepare a calculation and a quotation.

Request a quote