Rubber expansion joint Elaflex · group EPDM

ERV-R

Expansion joint for drinking and industrial water

The basic rubber expansion joint (vibration insert) of the ROTRING series for water and aquatic environments. Dampens vibration and noise from pumps, compensates for axial, shear and angular movements, and reduces the load during water hammer. Inner layer of butyl rubber/EPDM, potable water tolerance.

Diameter, DN
25-1000 mm
Pressure, PN
10 / 16 bar
Temperature
−40…+100 °C
ERV-R Rubber expansion joint Elaflex ERV-R, flanged, single sphere Elaflex · Germany
Applications

Where it is used

Water supply and sewerage
Heating networks, heating, ГВС/ХВС
Pumping stations and water intakes
Circulating water supply and cooling
Water treatment and treatment facilities
Ship and marine systems
Specifications

Technical specifications

TypeRubber (elastic) expansion joint, flanged, single sphere
Nominal bore, DN25-1000 mm
Working pressure, PN10/16 bar (depends on diameter and temperature)
Medium temperature-40 ... +100 °C, briefly up to +120 °C
Working mediumdrinking and industrial water, waste and recycled water, seawater and cooling water (including with chemical additives), weak acids and alkalis, saline solutions, industrial alcohols, esters, ketones
Not to be used forpetroleum products and oils, cooling water with oil inhibitors, compressor oil air
Inner layer (camera)butyl rubber (IIR) / EPDM, seamless, with low gas permeability
Reinforcementpolyamide textile cord, rubberized with butyl
Outer layerEPDM, ozone and heat resistant
Flangesswivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium)
MarkingRed BAND: ERV, DU, RU, date of manufacture
Versionelectrically conductive (discharge of static charge)
Approvals and certificatesWRAS (UK)

Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.

The exact values of displacements (axial, shear, angular) and permissible vacuum depend on the standard size and construction length and are determined during selection. The full data is in the technical data sheet (PDF).

Size range

Connection dimensions and articles

DNBellows PN, barD, mmk, mmHoles n×dBL, mmS, cm2Weight, kgVariant / request
2516115854×14130151.9ERV-R 25.16
Request
32161401004×18130153.4ERV-R 32.16
Request
32161401004×18160153.6ERV-R 32x160.16
Request
40161501104×18130204ERV-R 40.16
Request
40161501104×18160204.2ERV-R 40x160.16
Request
50161651254×18130304.6ERV-R 50.16
Request
50161651254×18150304.7ERV-R 50x150.16
Request
50161651254×18160304.8ERV-R 50x160.16
Request
65161851454×18130505.3ERV-R 65.16
Request
65161851454×18150505.4ERV-R 65x150.16
Request
65161851454×18160505.5ERV-R 65x160.16
Request
80162001608×18130856.9ERV-R 80.16
Request
80162001608×18150857ERV-R 80x150.16
Request
80162001608×18160857.1ERV-R 80x160.16
Request
100162201808×181301258ERV-R 100.16
Request
100162201808×181501258.1ERV-R 100x150.16
Request
100162201808×181601258.2ERV-R 100x160.16
Request
125162502108×181301859.9ERV-R 125.16
Request
125162502108×1815018510.1ERV-R 125x150.16
Request
125162502108×1816018510.2ERV-R 125x160.16
Request
150162852408×2213025012.3ERV-R 150.16
Request
150162852408×2215025012.4ERV-R 150x150.16
Request
150162852408×2216025012.5ERV-R 150x160.16
Request
200163402958×2213040016.5ERV-R 200.10
Request
200163402958×2215040016.6ERV-R 200x150.10
Request
200163402958×2216040016.7ERV-R 200x160.10
Request
200163402958×2217540016.8ERV-R 200x175.10
Request
2501639535012×2213060021.6ERV-R 250.10
Request
2501639535012×2217560021.9ERV-R 250x175.10
Request
2501039535012×2220060022.1ERV-R 250x200.10
Request
3001644540012×2213080029.3ERV-R 300.10
Request
3001044540012×2220080029.8ERV-R 300x200.10
Request
3501650546016×22200100043ERV-R 350.10
Request
4001656551516×26200137546ERV-R 400.10
Request
4501061556520×26200178050ERV-R 450.10
Request
4501061556520×26250178053ERV-R 450x250.10
Request
5001067062020×26200218557ERV-R 500.10
Request
6001078072520×30200308070ERV-R 600.10
Request
7001089584024×302604800117ERV-R 700.10
Request
80010101595024×332505440129.5ERV-R 800.10
Request
900101115105028×333007100184ERV-R 900.10
Request
1000101230116028×363008700245ERV-R 1000.10
Request

Variants from the Elaflex catalogue, revision 10.2026. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. DN 250 / DN 300, BL 200 mm: Bellows PN 10. WRAS (UK): ELAFLEX 10.2026. ELAFLEX 407–408 · PDF

D is the outer diameter of the flange, k is the diameter of the circumference of the holes, n×d is the number and diameter of the holes, L is the face length, S is the effective area (for calculating the spacer forces from pressure). Flange sizes according to DIN PN 10/16. Other flange standards and custom materials are available.

Description

About the ERV-R expansion joint

ERV-R is a flanged rubber expansion joint (vibration insert) of the ROTRING series manufactured by Elaflex. Its main task is to dampen vibration and noise that are transmitted to the pipeline from pumps and other equipment, as well as compensate for axial, shear and angular movements and reduce the load during a hydraulic shock.

The inner layer is made of butyl rubber and is seamless, with low gas permeability; the power frame is made of polyamide cord; the outer layer is made of ozone and heat resistant. This design ensures potable water tolerance (WRAS UK) and suitability for a wide range of aquatic environments, including seawater and recycled water with chemical additives. The design is electrically conductive.

The expansion joint is supplied with DIN PN 10/16 galvanized steel swivel flanges; stainless steel, bronze, aluminum and other flange standards are available on request. OnePROM selects the standard size for the parameters of the object, calculates the spacer forces and compensating capacity, and supplies it with accompanying documentation. For the selection, send the parameters or fill out the questionnaire.

How we work

From enquiry to delivery

01

Selection

We accept the parameters or a questionnaire, select the standard size and material.

02

Calculation and quotation

We calculate movements and thrust forces and prepare a quotation.

03

Supply

Shipped from stock or made to order with the required flange configuration.

04

Installation

Installation, installation supervision and commissioning on site where required.

Questions

Frequently asked questions

For which environments is ERV-R suitable?
For water and aquatic environments: drinking and industrial water, waste and recycled water, seawater and cooling water (including those with chemical additives), weak acids and alkalis, salt solutions. It is approved for drinking water (WRAS UK). It is not used for petroleum products and oils — group NBR expansion joints are used for them (for example, ERV-G).
What diameters and pressures are available?
Nominal passage DN 25-1000 mm, operating pressure Pn 10 and 16 bar (depends on diameter and temperature), ambient temperature -40...+100 °C, short-term up to +120 °C. Swivel flanges DIN PN 10/16, other standards and materials are available on request.
How to choose and order an ERV-R?
Send the project parameters (DN, PN, medium, temperature, movements) or complete the questionnaire — we will select the size, calculate thrust forces and prepare a quotation. Delivery across Russia and the CIS.

Let's select the ERV-R for your object

Send the parameters or a questionnaire — we will prepare a calculation and a quotation.

Request a quote