ERV-OR is a special rubber expansion joint Elaflex for gases and liquefied petroleum gas (LPG). It is designed for increased operating pressure up to 25 bar.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25–200 mm |
| Working pressure, PN | up to 25 bar |
| Medium temperature | −20 … +90 °C |
| Working medium | liquefied petroleum gas (LPG), gases |
| Not to be used for | concentrated acids |
| Inner layer (lining) | nitrile butadiene rubber (NBR) |
| Outer layer | CR |
| Flanges | swivel type, EN 1092-1 PN 25, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Temperature range checked against the ELAFLEX catalogue. Allowable pressure, temperature and movement are interdependent and depend on the medium and configuration; maximum values must not be combined without verification. Select against the manufacturer catalogue. ELAFLEX · 439–440
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n × d, mm | BL, mm | Variant |
|---|---|---|---|---|---|---|
| 25 | 25 | 115 | 85 | 4 × 14 | 130 | Request |
| 32 | 25 | 140 | 100 | 4 × 18 | 130 | Request |
| 40 | 25 | 150 | 110 | 4 × 18 | 130 | Request |
| 50 | 25 | 165 | 125 | 4 × 18 | 130 | Request |
| 65 | 25 | 185 | 145 | 8 × 18 | 130 | Request |
| 80 | 25 | 200 | 160 | 8 × 18 | 130 | Request |
| 100 | 25 | 235 | 190 | 8 × 22 | 130 | Request |
| 125 | 25 | 270 | 220 | 8 × 26 | 130 | Request |
| 150 | 25 | 300 | 250 | 8 × 26 | 130 | Request |
| 200 | 25 | 360 | 310 | 12 × 26 | 130 | Request |
Elaflex catalogue 439–440, revision 08.2024. D: flange outside diameter; k: bolt circle diameter; BL: face-to-face length. EN 1092-1 PN 25 flanges. DN 25 uses a DN 32 bellows; DN 150 and 200 are listed as PED 2014/68/EU category III. Availability, lead time and permissible operating conditions require confirmation.
The operating pressure, connection dimensions and flange configuration for the ERV-OR are tailored to the task. The exact parameters and weight are available in the passport / on request.
ERV-OR is a special rubber expansion joint Elaflex for gases and liquefied petroleum gas (LPG). It is designed for increased operating pressure up to 25 bar.
The diameters are DN 25–200 mm. The flanges are DIN PN, the high—pressure version is suitable for the task. The connection dimensions and configuration are specified during selection.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.