ERV-GS is a rubber expansion joint Elaflex for cooling systems of stationary and marine diesel engines. It senses vibrations and movements in the coolant and oil circuits.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-600 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | −20 … +90 °C |
| Working medium | coolant, water-glycol, oil, fuel |
| Not to be used for | concentrated acids |
| Inner layer (lining) | NBR |
| Outer layer | CR |
| Flanges | swivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Source: ELAFLEX, revision 08.2024. Temperature depends on the medium; temporarily up to +100 °C. The table shows bellows PN: DN 25–400 — PN 16; DN 450 and above — PN 10. Do not confuse the part-number suffix or flange connection standard with bellows PN. Allowable assembly pressure also depends on the flanges, temperature and medium. Other lengths and configurations are listed in the catalogue. ELAFLEX · 427–428
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 16 | 115 | 85 | 4×14 | 130 | ERV-GS 25.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 130 | ERV-GS 32.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 130 | ERV-GS 40.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 130 | ERV-GS 50.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 130 | ERV-GS 65.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 130 | ERV-GS 80.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 150 | ERV-GS 80x150.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 130 | ERV-GS 100.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 150 | ERV-GS 100x150.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 130 | ERV-GS 125.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 150 | ERV-GS 125x150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 130 | ERV-GS 150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 150 | ERV-GS 150x150.16 Request |
| 200 | 16 | 340 | 295 | 8×22 | 130 | ERV-GS 200.10 Request |
| 200 | 16 | 340 | 295 | 8×22 | 175 | ERV-GS 200x175.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 130 | ERV-GS 250.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 175 | ERV-GS 250x175.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 130 | ERV-GS 300.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 200 | ERV-GS 300x200.10 Request |
| 350 | 16 | 505 | 460 | 16×22 | 200 | ERV-GS 350.10 Request |
| 400 | 16 | 565 | 515 | 16×26 | 200 | ERV-GS 400.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 200 | ERV-GS 450.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 250 | ERV-GS 450x250.10 Request |
| 500 | 10 | 670 | 620 | 20×26 | 200 | ERV-GS 500.10 Request |
| 600 | 10 | 780 | 725 | 20×30 | 200 | ERV-GS 600.10 Request |
Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation.
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
ERV-GS is a rubber expansion joint Elaflex for cooling systems of stationary and marine diesel engines. It senses vibrations and movements in the coolant and oil circuits.
Lining NBR, diameters DN 25-600 mm, flanges DIN PN 10/16. Selection for contour parameters is based on a questionnaire.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.