ERV-GS HNBR is a reinforced version of the Elaflex expansion joint for extreme operating conditions. The lining made of hydrogenated butadiene-nitrile rubber (HNBR) provides increased heat and wear resistance, including short-term resistance to high temperatures.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-600 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | −35 … +100 °C |
| Working medium | petroleum products, oils, cooling liquids in harsh conditions |
| Not to be used for | concentrated acids |
| Inner layer (lining) | hydrogenated nitrile rubber (HNBR) |
| Outer layer | CR |
| Flanges | swivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Temperature range checked against the ELAFLEX catalogue. Allowable pressure, temperature and movement are interdependent and depend on the medium and configuration; maximum values must not be combined without verification. Select against the manufacturer catalogue. ELAFLEX · 431–432
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 16 | 115 | 85 | 4×14 | 130 | ERV-GS HNBR 25.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 130 | ERV-GS HNBR 32.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 130 | ERV-GS HNBR 40.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 130 | ERV-GS HNBR 50.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 130 | ERV-GS HNBR 65.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 130 | ERV-GS HNBR 80.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 150 | ERV-GS HNBR 80x150.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 130 | ERV-GS HNBR 100.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 150 | ERV-GS HNBR 100x150.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 130 | ERV-GS HNBR 125.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 150 | ERV-GS HNBR 125x150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 130 | ERV-GS HNBR 150.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 150 | ERV-GS HNBR 150x150.16 Request |
| 200 | 16 | 340 | 295 | 8×22 | 130 | ERV-GS HNBR 200.10 Request |
| 200 | 16 | 340 | 295 | 8×22 | 175 | ERV-GS HNBR 200x175.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 130 | ERV-GS HNBR 250.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 175 | ERV-GS HNBR 250x175.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 130 | ERV-GS HNBR 300.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 200 | ERV-GS HNBR 300x200.10 Request |
| 350 | 16 | 505 | 460 | 16×22 | 200 | ERV-GS HNBR 350.10 Request |
| 400 | 16 | 565 | 515 | 16×26 | 200 | ERV-GS HNBR 400.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 200 | ERV-GS HNBR 450.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 250 | ERV-GS HNBR 450x250.10 Request |
| 500 | 10 | 670 | 620 | 20×26 | 200 | ERV-GS HNBR 500.10 Request |
| 600 | 10 | 780 | 725 | 20×30 | 200 | ERV-GS HNBR 600.10 Request |
Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. Bellows PN is not the permissible pressure of the complete assembly: flange rating, medium and temperature must be considered. ERV-G and ROTEX DN 250 and DN 300 with BL 200 mm have bellows PN 10. ELAFLEX 431–432 · PDF
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
ERV-GS HNBR is a reinforced version of the Elaflex expansion joint for extreme operating conditions. The lining made of hydrogenated butadiene-nitrile rubber (HNBR) provides increased heat and wear resistance, including short-term resistance to high temperatures.
Diameters DN 25-600 mm, flanges DIN PN 10/16. The operating parameters for a specific environment and temperature regime are specified during selection.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.