ERV-GR is a rubber expansion joint for acids, alkalis, chemicals and chemically aggressive wastewater. The composition of the rubber is selected for resistance to aggressive environments.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-700 mm |
| Working pressure, PN | 10 / 16 bar |
| Medium temperature | −20 … +100 °C |
| Working medium | acids, alkalis, chemicals, chemically aggressive wastewater |
| Not to be used for | concentrated acids (see VITEX) |
| Inner layer (lining) | CSM |
| Outer layer | CSM |
| Flanges | swivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Temperature range checked against the ELAFLEX catalogue. Allowable pressure, temperature and movement are interdependent and depend on the medium and configuration; maximum values must not be combined without verification. Select against the manufacturer catalogue. ELAFLEX · 443–444
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 16 | 115 | 85 | 4×14 | 130 | ERV-GR 25.16 Request |
| 32 | 16 | 140 | 100 | 4×18 | 130 | ERV-GR 32.16 Request |
| 40 | 16 | 150 | 110 | 4×18 | 130 | ERV-GR 40.16 Request |
| 50 | 16 | 165 | 125 | 4×18 | 130 | ERV-GR 50.16 Request |
| 65 | 16 | 185 | 145 | 4×18 | 130 | ERV-GR 65.16 Request |
| 80 | 16 | 200 | 160 | 8×18 | 130 | ERV-GR 80.16 Request |
| 100 | 16 | 220 | 180 | 8×18 | 130 | ERV-GR 100.16 Request |
| 125 | 16 | 250 | 210 | 8×18 | 130 | ERV-GR 125.16 Request |
| 150 | 16 | 285 | 240 | 8×22 | 130 | ERV-GR 150.16 Request |
| 200 | 16 | 340 | 295 | 8×22 | 130 | ERV-GR 200.10 Request |
| 250 | 16 | 395 | 350 | 12×22 | 130 | ERV-GR 250.10 Request |
| 300 | 16 | 445 | 400 | 12×22 | 130 | ERV-GR 300.10 Request |
| 350 | 16 | 505 | 460 | 16×22 | 200 | ERV-GR 350.10 Request |
| 400 | 16 | 565 | 515 | 16×26 | 200 | ERV-GR 400.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 200 | ERV-GR 450.10 Request |
| 450 | 10 | 615 | 565 | 20×26 | 250 | ERV-GR 450x250.10 Request |
| 500 | 10 | 670 | 620 | 20×26 | 200 | ERV-GR 500.10 Request |
| 600 | 10 | 780 | 725 | 20×30 | 200 | ERV-GR 600.10 Request |
| 700 | 10 | 895 | 840 | 24×30 | 260 | ERV-GR 700.10 Request |
Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. Bellows PN is not the permissible pressure of the complete assembly: flange rating, medium and temperature must be considered. ERV-G and ROTEX DN 250 and DN 300 with BL 200 mm have bellows PN 10. ELAFLEX 443–444 · PDF
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
ERV-GR is a rubber expansion joint for acids, alkalis, chemicals and chemically aggressive wastewater. The composition of the rubber is selected for resistance to aggressive environments.
Diameters DN 25-700 mm, flanges DIN PN 10/16. Compatibility with a specific medium and concentration is checked according to the chemical table during selection.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.