Rubber expansion joint Elaflex · petroleum products

ERV-G

For petroleum products and gas

ERV-G is an Elaflex expansion joint with an NBR liner for mineral oil products with up to 50% aromatics, fuels with up to 85% ethanol, aviation fuel, town gas and natural gas. Not suitable for liquefied gas (LPG).

Diameter, DN
25-1000 mm
Pressure, PN
10 / 16 bar
Purpose
Petroleum products
ERV-G Rubber expansion joint Elaflex ERV-G — For petroleum products and gas Elaflex · Germany
Applications

Where it is used

Tank farms and storage depots
Fuel pipelines, filling stations
Pumping and loading stations
Natural gas
Bunkering and marine fuel
Specifications

Technical specifications

TypeRubber (flexible) expansion joint, flanged
Nominal bore, DN25-1000 mm
Working pressure, PN10 / 16 bar
Medium temperature−20 … +90 °C
Working mediumERV-G is an Elaflex expansion joint with an NBR liner for mineral oil products with up to 50% aromatics, fuels with up to 85% ethanol, aviation fuel, town gas and natural gas. Not suitable for liquefied gas (LPG).
Not to be used forconcentrated acids and alkalis
Inner layer (lining)nitrile butadiene rubber (NBR)
Outer layerCR
Flangesswivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium)
MarkingERV / type, DN, PN, date of manufacture

Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.

Temperature range checked against the ELAFLEX catalogue. Allowable pressure, temperature and movement are interdependent and depend on the medium and configuration; maximum values must not be combined without verification. Select against the manufacturer catalogue. ELAFLEX · 423–424

Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).

Size range

Connection dimensions (DIN PN 10/16)

DNBellows PN, barD, mmk, mmHoles n×dBL, mmVariant / request
2516115854×14130ERV-G 25.16
Request
32161401004×18130ERV-G 32.16
Request
32161401004×18160ERV-G 32x160.16
Request
40161501104×18130ERV-G 40.16
Request
40161501104×18160ERV-G 40x160.16
Request
50161651254×18130ERV-G 50.16
Request
50161651254×18150ERV-G 50x150.16
Request
50161651254×18160ERV-G 50x160.16
Request
65161851454×18130ERV-G 65.16
Request
65161851454×18150ERV-G 65x150.16
Request
65161851454×18160ERV-G 65x160.16
Request
80162001608×18130ERV-G 80.16
Request
80162001608×18150ERV-G 80x150.16
Request
80162001608×18160ERV-G 80x160.16
Request
100162201808×18130ERV-G 100.16
Request
100162201808×18150ERV-G 100x150.16
Request
100162201808×18160ERV-G 100x160.16
Request
125162502108×18130ERV-G 125.16
Request
125162502108×18150ERV-G 125x150.16
Request
125162502108×18160ERV-G 125x160.16
Request
150162852408×22130ERV-G 150.16
Request
150162852408×22150ERV-G 150x150.16
Request
150162852408×22160ERV-G 150x160.16
Request
200163402958×22130ERV-G 200.10
Request
200163402958×22150ERV-G 200x150.10
Request
200163402958×22160ERV-G 200x160.10
Request
200163402958×22175ERV-G 200x175.10
Request
2501639535012×22130ERV-G 250.10
Request
2501639535012×22175ERV-G 250x175.10
Request
2501039535012×22200ERV-G 250x200.10
Request
3001644540012×22130ERV-G 300.10
Request
3001044540012×22200ERV-G 300x200.10
Request
3501650546016×22200ERV-G 350.10
Request
4001656551516×26200ERV-G 400.10
Request
4501061556520×26200ERV-G 450.10
Request
4501061556520×26250ERV-G 450x250.10
Request
5001067062020×26200ERV-G 500.10
Request
6001078072520×30200ERV-G 600.10
Request
7001089584024×30260ERV-G 700.10
Request
80010101595024×33250ERV-G 800.10
Request
900101115105028×33300ERV-G 900.10
Request
1000101230116028×36300ERV-G 1000.10
Request

Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. Bellows PN is not the permissible pressure of the complete assembly: flange rating, medium and temperature must be considered. ERV-G and ROTEX DN 250 and DN 300 with BL 200 mm have bellows PN 10. ELAFLEX 423–424 · PDF

D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.

Description

About the ERV-G expansion joint

ERV-G is an Elaflex expansion joint with an NBR liner for mineral oil products with up to 50% aromatics, fuels with up to 85% ethanol, aviation fuel, town gas and natural gas. Not suitable for liquefied gas (LPG).

The inner layer is made of nitrile butadiene rubber (NBR), resistant to oils and gasoline. Diameters DN 25-1000 mm, flanges DIN PN 10/16. Selection and calculation are based on the parameters of the object.

How we work

From enquiry to delivery

01

Selection

We receive the parameters or questionnaire and select the series and size.

02

Calculation and quotation

We calculate movements and thrust forces and prepare an offer.

03

Supply

Shipped from stock or made to order with the required flange configuration.

04

Installation

Installation, installation supervision and commissioning on site where required.

Questions

Frequently asked questions

What environments is ERV-G suitable for?
Suitable for the following media: petroleum products, gasoline, diesel fuel, mineral oils, natural gas. Not applicable for: concentrated acids and alkalis.
What diameters and pressures are available?
DN 25-1000; PN 10 / 16 bar; −20 … +90 °C.
How to choose and order the ERV-G?
Send the project parameters (DN, PN, medium, temperature, movements) or complete the questionnaire — we will select the size, calculate thrust forces and prepare a quotation. Delivery across Russia and the CIS.

Let's select the ERV-G for your object

Send the parameters or a questionnaire — we will prepare a calculation and a quotation.

Request a quote