Rubber expansion joint Elaflex · water

ERV-CR

Economy option for water and wastewater

ERV-CR is an economical rubber expansion joint Elaflex for water supply and sanitation systems. It is used for cold and hot water, as well as wastewater containing impurities. Dampens vibration and compensates for axial, shear and angular movements of the pipeline.

Diameter, DN
25-1000 mm
Pressure, PN
10 / 16 bar
Purpose
Water and wastewater
ERV-CR Rubber expansion joint Elaflex ERV-CR is an economical option for water and wastewater Elaflex · Germany
Applications

Where it is used

Water supply and sewerage
District heating, hot and cold water
Pumping stations
Wastewater and wastewater with impurities
Recycled water supply
Industrial water systems
Specifications

Technical specifications

TypeRubber (flexible) expansion joint, flanged
Nominal bore, DN25-1000 mm
Working pressure, PN10 / 16 bar
Medium temperature−25 … +90 °C
Working mediumcold and warm water, pool water, seawater, weakly acidic or alkaline waste water including oily water; lubricating oil, grease and air
Not to be used fordrinking water, acids, alkalis, chemicals, diesel, gasoline, kerosene, solvents and hot compressed air
Inner layer (lining)CR
Outer layerCR
Flangesswivel type, DIN PN 10/16, galvanised steel (optionally stainless steel, bronze or aluminium)
MarkingERV / type, DN, PN, date of manufacture

Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.

Source: ELAFLEX, revision 08.2024. Temperature depends on the medium; temporarily up to +100 °C. The table shows bellows PN: DN 25–400 — PN 16; DN 450 and above — PN 10. Do not confuse the part-number suffix or flange connection standard with bellows PN. Allowable assembly pressure also depends on the flanges, temperature and medium. Other lengths and configurations are listed in the catalogue. ELAFLEX · 415–416

Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).

Size range

Connection dimensions (DIN PN 10/16)

DNBellows PN, barD, mmk, mmHoles n×dBL, mmVariant / request
2516115854×14130ERV-CR 25.16
Request
32161401004×18130ERV-CR 32.16
Request
40161501104×18130ERV-CR 40.16
Request
50161651254×18130ERV-CR 50.16
Request
65161851454×18130ERV-CR 65.16
Request
80162001608×18130ERV-CR 80.16
Request
100162201808×18130ERV-CR 100.16
Request
125162502108×18130ERV-CR 125.16
Request
150162852408×22130ERV-CR 150.16
Request
200163402958×22130ERV-CR 200.10
Request
2501639535012×22130ERV-CR 250.10
Request
3001644540012×22130ERV-CR 300.10
Request
3501650546016×22200ERV-CR 350.10
Request
4001656551516×26200ERV-CR 400.10
Request
4501061556520×26200ERV-CR 450.10
Request
4501061556520×26250ERV-CR 450x250.10
Request
5001067062020×26200ERV-CR 500.10
Request
6001078072520×30200ERV-CR 600.10
Request
7001089584024×30260ERV-CR 700.10
Request
80010101595024×33250ERV-CR 800.10
Request
900101115105028×33300ERV-CR 900.10
Request
1000101230116028×36300ERV-CR 1000.10
Request

Variants from the Elaflex catalogue, revision 08.2024. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation.

D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10/16. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.

Description

About the ERV-CR expansion joint

ERV-CR is an economical rubber expansion joint Elaflex for water supply and sanitation systems. It is used for cold and hot water, as well as wastewater containing impurities. Dampens vibration and compensates for axial, shear and angular movements of the pipeline.

Available in a wide range of diameters DN 25-1000 mm. The inner layer and the outer lining are made of CR. It is supplied with rotary flanges DIN PN 10/16; other flange standards and materials are available on request. OnePROM selects the standard size for the object parameters.

How we work

From enquiry to delivery

01

Selection

We receive the parameters or questionnaire and select the series and size.

02

Calculation and quotation

We calculate movements and thrust forces and prepare an offer.

03

Supply

Shipped from stock or made to order with the required flange configuration.

04

Installation

Installation, installation supervision and commissioning on site where required.

Questions

Frequently asked questions

For which environments is ERV-CR suitable?
It is suitable for the following media: cold and warm water, pool water, seawater, weakly acidic or alkaline waste water including oily water; lubricating oil, grease and air. Not applicable for: drinking water, acids, alkalis, chemicals, diesel, gasoline, kerosene, solvents and hot compressed air.
What diameters and pressures are available?
Nominal passage DN 25-1000 mm, operating pressure Pn 10/16 bar, temperature −25 … +90 °C. Swivel flanges DIN PN 10/16, other standards and materials are available on request.
How to choose and order an ERV-CR?
Send the project parameters (DN, PN, medium, temperature, movements) or complete the questionnaire — we will select the size, calculate thrust forces and prepare a quotation. Delivery across Russia and the CIS.

Let's select the ERV-CR for your object

Send the parameters or a questionnaire — we will prepare a calculation and a quotation.

Request a quote