ERP — rubber expansion joint Elaflex with increased flexibility for water and aquatic environments. The increased compensating capacity makes it possible to perceive large movements with limited mounting space.
Elaflex · Germany
| Type | Rubber (flexible) expansion joint, flanged |
|---|---|
| Nominal bore, DN | 25-150 mm |
| Working pressure, PN | 10 bar |
| Medium temperature | −40 … +90 °C |
| Working medium | cold and warm water, drinking water, pool water and seawater |
| Not to be used for | petroleum products and oils |
| Inner layer (lining) | Butyl (IIR) / EPDM |
| Outer layer | EPDM, ozone and heat resistant |
| Flanges | swivel type, DIN PN 10, galvanised steel (optionally stainless steel, bronze or aluminium) |
| Marking | ERV / type, DN, PN, date of manufacture |
Permissible assembly pressure, temperature and movements must be checked together for the medium, flanges and selected variant. Bellows rating and maximum temperature are not a simultaneous operating condition. Availability and lead time require confirmation.
Checked against ELAFLEX catalogue pages 419–420, revision 11.2025. PN 10; allowable pressure depends on temperature. The range −40 … +90 °C depends on the medium; temporarily up to +120 °C. ERP is not intended for heating systems, mineral oils, cooling water with oily corrosion inhibitors or oily compressed air. Confirm operating conditions when selecting the joint. ELAFLEX · 419–420
Exact movements and permissible vacuum depend on the size and face-to-face length and are determined during selection. Full data is given in the technical data sheet (PDF).
| DN | Bellows PN, bar | D, mm | k, mm | Holes n×d | BL, mm | Variant / request |
|---|---|---|---|---|---|---|
| 25 | 10 | 115 | 85 | 4×14 | 130 | ERP 25.10 Request |
| 32 | 10 | 140 | 100 | 4×18 | 130 | ERP 32.10 Request |
| 40 | 10 | 150 | 110 | 4×18 | 130 | ERP 40.10 Request |
| 50 | 10 | 165 | 125 | 4×18 | 130 | ERP 50.10 Request |
| 65 | 10 | 185 | 145 | 4×18 | 130 | ERP 65.10 Request |
| 80 | 10 | 200 | 160 | 8×18 | 130 | ERP 80.10 Request |
| 100 | 10 | 220 | 180 | 8×18 | 130 | ERP 100.10 Request |
| 125 | 10 | 250 | 210 | 8×18 | 130 | ERP 125.10 Request |
| 150 | 10 | 285 | 240 | 8×22 | 130 | ERP 150.10 Request |
Variants from the Elaflex catalogue, revision 11.2025. BL is the face-to-face length. Suffixes .10 and .16 identify the illustrated flange configuration; bellows PN is shown separately. DN 25 uses a DN 32 bellows. Availability, lead time and operating conditions require confirmation. ELAFLEX 419–420 · PDF
D is the flange outside diameter, k the bolt circle diameter, n×d the holes, L the standard face-to-face length. Flange dimensions to DIN PN 10. Weight and effective area depend on the size and are given in the data sheet or on request. Other flange standards and materials are available to order.
ERP — rubber expansion joint Elaflex with increased flexibility for water and aquatic environments. The increased compensating capacity makes it possible to perceive large movements with limited mounting space.
Available in diameters DN 25-150 mm with a Butyl (IIR) / EPDM lining. The flanges are pivoting DIN PN 10. The selection of the standard size and the calculation of movements are based on the questionnaire.
We receive the parameters or questionnaire and select the series and size.
We calculate movements and thrust forces and prepare an offer.
Shipped from stock or made to order with the required flange configuration.
Installation, installation supervision and commissioning on site where required.
Send the parameters or a questionnaire — we will prepare a calculation and a quotation.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.