An engineering tool

Calculation of pipeline elongation

Online calculator of thermal elongation of a pipeline section according to the standard engineering formula ΔL = α·L·ΔT. Enter the length, pipe material, and temperatures to get an approximate elongation and a recommendation for the type of expansion joint.

Bellows expansion joint on a pipeline
Engineering calculator
Pipeline thermal expansion calculation
support support L
Thermal expansion of the section
—
Select an expansion joint

How to use the calculation

The coefficient of linear thermal expansion (α) depends on the pipe material: for carbon steel ≈ 0.012 mm/(m·°C), stainless steel ≈ 0.0165 mm/(m·°C), cast iron ≈ 0.010 mm/(m·°C), polyethylene ≈ 0.20 mm/(m·°C). The elongation ΔL increases in proportion to the length of the section between the fixed supports and the temperature difference between installation and operation.

The calculation provides an approximate value for a preliminary estimate. The exact selection of the expansion joint model, its type (axial, shear, angular, СКУ) and size also depends on the diameter, operating pressure, laying scheme and required resource — we specify these parameters according to the questionnaire or the specification of the object.

We will select an expansion joint for your calculation

Send the pipeline section length, operating conditions and nominal diameter. We will prepare a technical solution and a quotation.

Request a quote