Rotary ("eyeglass") plugs according to ATK 26-18-5-93 — for operational disconnection of a pipeline section by turning, without dismantling the flanges. DN 50-500, Pn up to 25.
| Item | The plug is rotatable ("glasses") |
|---|---|
| Design | Ring + blind disc, connected by a jumper |
| Purpose | Quick turn-off |
| Nominal bore DN | 50-500 mm |
| Nominal pressure PN | 6 / 10 / 16 / 25 the bar |
| Installation | Between the flanges (flanged) |
| Material | Ст20, 09Г2С, 12Х18Н10Т |
| Standard | ATK 26-18-5-93 |
| Temperature | −40…+450 °C |
| Medium | Water, steam, petroleum products, gas |
The letters on the diagram correspond to the columns of the dimension table below.
"Open" means a ring in the flow (passage is open); "Muffled" means a disk (flow is blocked).
Loosen the bolts, turn the "glasses" around the bridge, tighten — without removing the flanges.
It is mounted between flanges with gaskets as an inter-flange element.
The diameters of the ring and disc, the thickness and parameters of the bridge are according to ATK 26-18-5-93, depending on the DN, Pn and the connecting dimensions of the counter flanges. We will match it to your flange assembly.
These are two elements — a ring and a blind disc connected by a jumper. By turning between the flanges, either a ring is installed (the passage is open) or a disk (the section is plugged).
Allows you to change the "open/closed" position without completely disassembling — just loosen the bolts and turn.
According to ATK 26-18-5-93 for Dn, Pn and the connecting dimensions of the flanges.
Between the flanges as an inter-flange element with gaskets.
Ст20, 09Г2С, 12Х18Н10Т.
Send the parameters (DN, PN, material, GOST) or a specification — we will prepare an offer with lead times.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.