Fittings

The caps are elliptical

Elliptical welded caps (bottoms) according to ГОСТ 17379 — for hermetically closing the end of the pipeline. DN 20-1420, steel Ст20, 09Г2С, 12Х18Н10Т, for welding.

DN 20–1420ГОСТ 17379the ellipse 2:1under weldingSteel 20·09Г2С·stainless steel
The caps are elliptical
Specifications

Technical parameters

ItemThe plug is elliptical (bottom) welded
FormElliptical (2:1)
Nominal bore DN20-1420 mm
Wall thickness3.0–24 mm (through the pipe)
MaterialСт20, 09Г2С, 12Х18Н10Т
ConnectionFor butt welding
StandardГОСТ 17379-2001
Pressureup to PN 160
Temperature−70…+450 °C
MediumWater, steam, petroleum products, gas
Dimension diagram

Drawing to GOST

D H h Elliptical plug: D — diameter, H — height, h — side (ГОСТ 17379)

The letters on the diagram correspond to the columns of the dimension table below.

Dimensions

Dimension table

DND nar, mmS, mm
2533,73,0
3242,43,0
4048,33,5
5060,34,0
6576,14,0
8088,94,5
100114,35,0
125139,75,5
150168,36,0
200219,17,0
250273,08,0
300323,99,0
350355,610,0
400406,411,0
500508,012,0
600610,014,0

D is the outer diameter (through the pipe), S is the wall thickness. Height H and side h are ГОСТ 17379 (for a 2:1 ellipse, the internal height is Dвн/4 + the side height). They are selected according to the DN and the thickness of the pipe.

Kinds

Versions

Elliptical

Standard bottoms 2:1 according to 17379 are optimal in terms of strength and metal consumption.

Material

Carbon, low alloy and stainless steel.

Processing

For welding; edge cutting and antikor coating are possible.

Applications

Where they are used

  • Hermetically sealed closure of pipeline ends
  • Bottoms of vessels, collectors, and apparatuses
  • Heating networks, oil and gas, process lines
Order

What to state when ordering

  • DN (or outer diameter × wall thickness)
  • Steel grade and ГОСТ
  • Edge cutting/coating
Questions

Frequently asked questions

Why are the caps made elliptical?

The elliptical shape (2:1) optimally distributes pressure stresses at low height and metal consumption, which is stronger than a flat one.

How does it join?

It is butt—welded to the end of the pipe; the wall thickness is along the pipe.

What are the sizes of H and H?

H is the total height of the plug, h is the height of the cylindrical side for welding (according to ГОСТ 17379).

What kind of steels?

Ст20, 09Г2С, 12Х18Н10Т and others .

Up to what pressure?

Up to Ру160 depending on the thickness and grade of steel.

We will select and supply for your project

Send the parameters (DN, PN, material, GOST) or a specification — we will prepare an offer with lead times.

Request a quote