Equal—pass and transition steel tees according to ГОСТ 17376 - for pipeline branching. DN 25-1420, steel Ст20, 09Г2С, 12Х18Н10Т, for welding.

| Item | Steel tee (equal-pass/transition) |
|---|---|
| Type | Equal-pass, transitional |
| Nominal bore DN | 25-1420 mm |
| Manufacturing | Stamped (seamless), welded |
| Wall thickness | 2.0–20 mm (through the pipe) |
| Material | Ст20, 09Г2С, 12Х18Н10Т and others . |
| Connection | For butt welding |
| Standards | ГОСТ 17376-2001 (ISO 3419) |
| Pressure | up to PN 160 |
| Temperature | −70…+450 °C |
| Medium | Water, steam, petroleum products, gas, aggressive media |
The letters on the diagram correspond to the columns of the dimension table below.
| DN | Nominal diameter D, mm | C (center–end), mm | Wall thickness S, mm |
|---|---|---|---|
| 25 | 33,7 | 38 | 2,0–4,0 |
| 32 | 42,4 | 48 | 2,0–4,0 |
| 40 | 48,3 | 57 | 2,0–5,0 |
| 50 | 60,3 | 64 | 2,9–5,5 |
| 65 | 76,1 | 76 | 2,9–6,0 |
| 80 | 88,9 | 86 | 3,2–7,0 |
| 100 | 114,3 | 105 | 4,0–8,0 |
| 125 | 139,7 | 124 | 4,0–9,0 |
| 150 | 168,3 | 143 | 4,5–11,0 |
| 200 | 219,1 | 178 | 6,0–12,0 |
| 250 | 273,0 | 216 | 6,0–14,0 |
| 300 | 323,9 | 254 | 7,0–16,0 |
| 350 | 355,6 | 279 | 8,0–16,0 |
| 400 | 406,4 | 305 | 9,0–16,0 |
| 500 | 508,0 | 381 | 9,0–20,0 |
| 600 | 610,0 | 457 | 9,0–22,0 |
C is the distance from the center of the tee to the end (equal passage). Body length L=2·C, branch height H=C. By ГОСТ 17376-2001 (ISO 3419 / ASME B16.9). Transition tees and intermediate DN are available on request.
The branch line is the same diameter as the main line.
A branch with a smaller diameter (denoted D×d).
Seamless according to ГОСТ 17376, DN up to 400.
For large diameters and non-standard inserts.
An equal—pass branch has the same diameter as the main line; a transitional one has a smaller one (denoted D×d, for example 108×57).
C is the distance from the center of the tee to the end; for an equal—pass, the length of the body is L=2C, the height of the branch is H=C.
Up to Ду400 — seamless stamped; more — welded.
Ст20, 09Г2С, 12Х18Н10Т and others .
Butt welding on all three ends.
Send the parameters (DN, PN, material, GOST) or a specification — we will prepare an offer with lead times.
Request a quoteLeave your contact details — we will select the model and prepare a quotation. We reply within one working day.